HyperTerminal is an award winning terminal emulation program capable of connecting to systems through TCP/IP Networks, Dial-Up Modems, and COM ports. You may want to check out more software, such as HyperTerminal Private Edition, HyperACCESS or KVH Flash Update Wizard, which might be related to HyperTerminal. Dec 21, 2010 07:52 AM. If you are unable to get console contact. First check that it is in the Console port you are connected. (blue label stating console on it.) The AUX port does not work on the ASA, it is for internal use only according to Cisco. Check the settings on the serial port of the pc in hyper terminal. (September 2015) HyperACCESS (sometimes known as HyperTerminal) is a family of terminal emulation software by Hilgraeve. A version of HyperACCESS, called HyperTerminal.

How to Upgrade a Cisco 1841 IOS
The Cisco 1841 router can provide reliable service for years without a software upgrade. However, periodically Cisco releases an updated IOS with security and defect fixes that help ensure continued proper operation and performance. An IOS upgrade of the Cisco 1841 router can be performed in about 15 minutes.

Instructions

1. Connect one end of the serial console cable into the 9-pin serial port on the Windows XP computer, then connect the other end of the cable into the Cisco 1841 serial console port.

Click the “Start” button on the XP computer, then click the “Run” box, type “hypertrm” and press the “Enter” key. The “HyperTerminal” application will appear.

Type a name for the “HyperTerminal” connection in the “Name:” field presented in the first window, then press the “Enter” key. Click “Connect using:” In the drop-down menu that appears, select the “Com port” that connects the computer to the Cisco 1841 router, then tap the “Enter” key.

Click “Bits per second:” and select the “9600” setting from the list that appears. Click “Flow Control” then the “None” setting in the list that appears, then press the “Enter” key.

Tap the “Enter” key and the Cisco command line interface (CLI) will appear. Type the console port password if requested, then tap the “Enter” key.

Type “enable” and tap the “Enter” key, then type the Privileged Exec password and tap the “Enter” key.

Enter “show flash” on the command line and tap the “Enter” key. If the “sdm.tar” file is listed in the command line output, then type “delete flash:sdm.tar” and tap the “Enter” key, then tap the “Enter” key again to confirm that you wish to delete the “sdm.tar” file. If the “sdm.tar” file is not listed, then proceed to the next step.

Type “show flash” on the command line and tap the “Enter” key. Note the name of the IOS image file that is displayed in the command line output.

Type “delete IOS_file” but replace the “IOS_file” with the exact name of the IOS image file that was displayed in the earlier command line output. Press the “Enter” key to confirm that you wish to delete the file.

Type “copy tftp flash” on the command line, and tap the “Enter” key.

Free Hyperterminal Software

Enter the IP address of the XP computer that has the TFTP service installed, then tap the “Enter” key.

Enter the name of the IOS file that will be used to update the Cisco 1841 router, then tap the “Enter” key.

Enter the name of the IOS file again to confirm the filename, then tap the “Enter” key. The IOS image file will copy from the Windows XP TFTP service to the Cisco 1841 router.

Connecting To Cisco Console Port With HyperTerminal - YouTube

Type “reload” at the command prompt to restart the router and run the new IOS image.

Software Configuration Register

See Full List On Petri.com